17 Years electric bike factory, Provide brand customized & ODM/OEM services.

About   Contact    |    



Advice for safe riding of electric bikes

Advice for safe riding of electric bikes

E-bike commuting is simply not great! You can carry more stuff without breaking a sweat, go faster than a traditional bike with less effort, and don’t even worry about traffic jams or parking issues. In addition, cycling is also equivalent to exercising outdoors. The same caveat as with traditional bikes is that knowing how to safely commute with an e-bike makes the whole experience more fun and rewarding.

1. Start slowly – You may be tempted to get your e-bike up to the top speed set immediately, but we recommend taking it easy and starting with a low power setting for the first few rides. We also recommend that you ride in a large open parking lot or closed road before you become familiar with e-bikes.

2. Faster braking – More power, higher speeds, and a heavier frame means you need to start slowing down your e-bike earlier than a regular bike.

3. Smooth and gentle braking – Basically all e-bikes have disc brakes, which means more efficient braking in any situation. As you get used to your new bike and brakes, be sure to always apply the braking force gradually in a gentle motion, pulling both brake levers evenly.

4. Ride extra attention – e-bikes look just like regular bikes, so one might not expect you to ride as fast as an e-bike allows. This means you should be extra careful while riding and pay more attention to your surroundings.

5. Follow the traffic rules – Your new e-bike will give you more freedom and fun, but it’s still your responsibility to know and obey all road, road and trail traffic rules in your area. Electric bicycles have many advantages, you may wish to experience them and show the fun of riding. No one likes a reckless cyclist, especially an e-bike.

Of course, make sure to wear a high-quality helmet correctly before every ride, no matter the distance!

Know your path

What’s special about e-bike commuting is that you can take slightly longer but safer paths (or better views!), and even then get there on time. It’s best to plan your path in advance, or even ride it once on a weekend or rest day, calculating how long it will take and whether you like the road.

Use an online map service to research your route, and if you need turn-by-turn directions, consider adding a handlebar mount for your phone or GPS. Pro tip: You can always drop into your local bike shop for trail advice!

Optimizing e-bike travel

Safe riding of Electric bikes trips per charge depend on your battery, motor and assist level. Factors like wind, weather, temperature, and slope also have a huge impact, but you can’t change those! Then, try the following methods to get the most out of it:

Find a comfortable cadence
The slower your feet spin, the harder the motor will work. Gradually change gears to find an efficient balance so that neither you nor your motor is overloaded.

lighten the load
One of the advantages of electric bikes is that they can carry more. But the disadvantage is that the more it is loaded, the greater the load on the motor. It is recommended that you pay attention to the weight you are carrying.

Use a lower level of auxiliary power
The higher the power mode, the less travel. Try using a higher level of assist on uphill and a lower assist on flat terrain.

Watch this guided tutorial for more tips on increasing your range, and use the Bosch Battery Finder tool to help calculate your e-bike range.

Getting Attention Improves Safety
Motorists (and other cyclists and pedestrians) don’t always notice cyclists, regardless of when and where they ride. Especially during peak commuting hours, it’s easy to get distracted. The good news is that there are proven ways to get people to notice you.

Always turn on the lights
During the day, use the front and rear daytime riding lights, the special flash pattern helps others notice you from a distance. At night, use bright headlights to illuminate the road ahead in addition to flashing headlights and taillights.

Wear high-visibility clothing
Fluorescent clothing can attract attention and also increase the visibility of cyclists during the day. Avoid wearing all dark clothing!

Wear reflective clothing
Apparel with reflective elements plays an important role in being detected in poor light and at night.

Install the bell
Pressing the bell can help alert pedestrians and other cyclists of their presence, especially when passing them.

Learn how to pack and travel
You must have heard the adage – being prepared is best! We’ll show you what to pack on every ride and how to pack strategically.

Here is a short list:

1) Front and rear lights – always turn on the lights, even during the day!
2) puncture kit
3) Water and food
4) Warm clothes and/or raincoat
5) Mobile phone and cash

When using an electric bicycle, it is also necessary to ensure that the battery is fully charged before hitting the road. You might even want to bring a charger if you’re not familiar with trails and don’t know the time or distance to ride. Of course, don’t forget to wear a quality helmet too.
Lock your electric bike correctly
While electric bikes can be parked almost anywhere a normal bike can be parked, make sure the place is secure and be aware of the locks.

Buy good car locks
Even if your e-bike comes with a lock, consider purchasing another one to keep your personal belongings safe. Be sure to choose high-quality locks that won’t be easily cut by thieves. Lock the bike to a permanent fixture and, if possible, use a cable lock to lock the wheels and any quick-release parts (such as the saddle).

Please pay attention to the parking place
Like other bicycles, even properly locked, they can still be targeted for theft. Overnight parking is especially true as late-night vandalism occurs. It is recommended to park the electric bicycle in a well-lit place where other bicycles are also parked.

Please take the battery away
If the battery can be easily removed from the frame, it is best to take the battery with you. If it’s just a short stop at the store, it’s probably fine to leave the battery in the car, but if you’re leaving the car for a few hours at work or out all day, we recommend taking the battery with you.

So how to take care of your electric bike

However, just like regular pedal bikes, e-bikes require routine maintenance to function perfectly. Fortunately, electrical and electronic systems do not require frequent maintenance. Therefore, the maintenance and service procedures for your e-bike are not much different from regular bicycles. Off-road riding in particular requires a thorough inspection.

How to Determine if Your Electric Bike Needs Service
In addition to regular maintenance and service inspections, it’s important to watch for any signs of failure. If you suspect a problem with your two-wheeler, please do not delay visiting a service center. The most common signs of a problem are:

unusual sound
Literally, you have to listen to the sound of the electric bike. Your vehicle’s mechanics are designed to work quietly. Sounds you’ve never heard before indicate a problem.
Difficulty riding. In addition to being quiet, your e-bike must run smoothly. However, if you find it difficult to pedal or steer your two-wheeler, it may be the cause of the malfunction. The most common problems are mechanical failure or battery failure.

Visual sign
Regular visual inspections of your e-bike. You can identify signs of rusted parts or bumps. Also, you can detect them by carefully looking at tires for signs of wear.

metal fatigue
If you ride a lot (like most e-bike fans), your two-wheeler may be showing signs of metal fatigue. But don’t panic, it’s not a terrible disease. This phenomenon affects the metal parts of electric bicycles. By the way, aluminum frames are more likely to lose tensile strength over time due to metal fatigue. This happens when small cracks develop in the material due to stress cycling or direct impact. The cracks expand, eventually causing the metal to break. It’s best to check regularly to spot these microscopic cracks. A professional technician should check your e-bike for this problem.

Changes in body fluids
Some e-bikes use hydraulic brakes. In such braking systems, the fluid inside the sealed hose replaces the traditional steel cable. When the lever is pushed, the fluid transfers pressure to the caliper. Over time, brake fluid is often contaminated with dust and other particles. It can lead to wrong pressure transmission. When this happens, the fluid must be replaced. We recommend changing brake fluid regularly to ensure brake reliability. This maintenance operation must be performed by professionals.

Tips for caring for your e-bike yourself

To prolong the life of your two-wheeler, you should learn how to take care of your e-bike yourself with a few simple actions. Combining the tips below with regular visits to the service center for more professional care and maintenance is possible.

keep it clean
Cleaning your e-bike after a ride is a good habit to keep in top shape. Use only bicycle cleaning products. . Avoid using jet cleaning as high water pressure can remove grease that lubricates bearings and other moving parts. It can also cause water to build up inside the mechanism, eventually leading to corrosion. Again, be careful if you use a high power hose.

Lastly, don’t forget to see how the rack locks to the car hook if fitted with an e-bike rack that fits the car hook. You don’t want to go to great lengths to lock your e-bike to the frame and get both stolen!

Our factory provide OEM and ODM,if you are interested in our electric bike, you can log on our official website to know more about details. If you have any query or electric bicycle transportation problem,please feel free to contact us and we will contact you APSAP. https://gzdlsdz.en.alibaba.com/

Please Leave us an inquiry.We are looking forward to your arrival.


    Please prove you are human by selecting the House





    Leave a message

      Please prove you are human by selecting the Plane.