14 years Professional electric bike factory

logo-3

Blog

How to prevent the bike chain from breaking

How to prevent the bike chain from breaking

bike chain

When the bike chain is old and damaged, what kind of crisis will it encounter? Dropping the chain may be easy to solve, but it also directly predicts that your chain is quite old. The broken chain is an unexpected situation that is difficult to solve. You must carry repair tools at any time and reassemble the chain halfway to restore the original state.

After the end of such a long riding distance, it not only consumes one’s own physical energy, but also because of long-term heavy gear or simultaneous shifting, coupled with the muddy and humid riding environment, the chain gets too much dirt, and the winding and During the alternating process of the lower chain, the wear of the chain is increased and its life is shortened.

What kind of crisis will the old and damaged chain run into?

bike chain
If you neglect to maintain the chain for a long time, then clean it and oil it regularly. The chain will get stuck in the environment after many times of use, and the chain will lose its function, and you cannot easily change your upper chain by shifting. The chain and the lower chain directly cause dissatisfaction in the riding, and it feels like a jam.

Bike chain broken and suddenly broken or dropped links during riding. This is definitely the situation that riders and riders are most afraid of encountering in the process of riding.

Chain drop may be easy to solve, but it also directly predicts that your chain is quite old, easy to loosen, and loses its original elasticity, which will weaken the effect and meaning of shifting.

The broken chain is an unexpected situation that is difficult to solve. You must carry repair tools at any time and reassemble the chain halfway to restore the original state.

It is recommended for riders that you should break the broken link first, and use the quick buckle to temporarily connect the two ends before you can continue the short-distance riding; of course, the best suggestion is to use electronic calipers or simple Caliper, measured with eight meshes as the unit, carefully check whether your chain exceeds the elongation rate to ensure the life of the chain.

Standards for maintenance and cleaning of chains

bike chain
When you find that the speed change effect is not good during riding, it will be loose or unsmooth, and even noise will appear during operation. This is to remind you: the chain urgently needs to be tidied up!

Generally speaking, the use of the chain depends on the rider. Even if your riding environment is not too muddy, but it is maintained at least once a month, which not only increases the sliding force of the variable-speed pulling chain, but also aligns the connection points of the upper and lower chains more accurately to avoid chain drop.

Correct maintenance and cleaning procedures

bike chain
Using the correct maintenance and cleaning procedures can more effectively increase the life of the chain; instead of taking the bicycle to a professional store for disposal, it is better to learn the DIY procedure to facilitate careful handling at home, which not only saves a lot of maintenance costs, but also can be close to your own bicycle.

Many bikers are mostly used to soak the chain in detergent, and then pick it up for a deep cleaning after a while, and even use highly corrosive herbicides to wipe off the rust. This method will cause great damage to the chain!

The cleaning agent penetrates into the details of the chain excessively by immersing it, causing it to over-clean, eroding the surface of the chain, making the overall texture of the chain susceptible to external forces and causing scars. It is very fragile and easier to break!

Then, further drip the chain maintenance oil on the bearing, and turn the pedal to make it enter the contact surface between the chain and the chaining, so that the maintenance oil can penetrate into it better, and then use the white brush head to evenly apply the maintenance oil on the chain, use a rag to wipe the surface back and forth with excess oil stains, and average the distribution of oil stains.

If you interest in bike chain, you can leave a message.

PersonalBusinessDistributor


Tags:
Prev:
Next: