14 years Professional electric bike factory

logo-3

Products

How to climb hills on cross-country roads with mountain bikes

Steep hillsides, soft shimmering roads and low friction The secret to ensuring that the bicycle keeps moving forward during the crawling process is to make the rider’s body we ...
Product Details

Steep hillsides, soft shimmering roads and low friction

The secret to ensuring that the bicycle keeps moving forward during the crawling process is to make the rider’s body weight distribution, riding posture, strength, pedaling method and the best route coordination reach the best state.

The weight distribution is when climbing steep and difficult slopes. Some riders are accustomed to adopting a standing posture. This is more effective on hard, frictional ground, but in typical off-road sports, the situation is quite different. The same. At this time, cycling skills showed its important role. The driver should try to move the body’s center of gravity to the rear of the seat to increase the pressure on the rear wheels, thereby increasing friction. But in doing so, the front wheel is easy to tilt up, making it difficult to ride the bicycle, and it may tip over backwards. If the center of gravity is moved forward, the front wheel will not leave the ground, but the rear wheel may spin idly on the ground with relatively soft soil. As a result, the bicycle will be difficult to move.

After taking into account the various factors mentioned above, the rider should adjust the position of the body’s center of gravity at any time according to the terrain. In order to achieve the best distribution of body weight, the rider’s buttocks may just sit gently on the front of the seat.

In order to drive the bicycle forward, the rider must continuously and smoothly transmit energy to the power system. If the force is too much, it may reduce the friction; if the force is too small, it may slow down the speed or cause the bicycle to stop. If you slam the pedal up and down, instead of making the pedal circulate smoothly, the wheels will slip due to the reduced friction with the ground and idling on the ground.

Long-distance climbing

The general cycling rules are applicable to this kind of sport, but the specific rules should be determined according to the difficulty of the terrain and the size of the slope. However, in order to be able to ride the entire distance, the rider must do what he can, choose the right speed and gear ratio. To conquer all slopes, the rider needs to be physically strong, have enough strength, master considerable riding skills, and be able to adopt a correct attitude towards sports.

In the beginning, some riders were not strong enough to cope with certain types of slopes. However, with enough exercise, the situation can be improved. When you first start training, don’t aim at the entire mountain. Start where you can handle it first, and then gradually transition to the more difficult step. In addition, remember that as long as the goal can be achieved, don’t care about when. If you are confident that you can conquer most slopes, you need to consider speed.

How to re-start a bike on a steep slope with soft soil

Once the bicycle has stopped on a slope, it is not easy to start again. The driver must get out of the car, walk a few steps forward, or back a few steps, and choose a suitable place to start again. The selected place must be flat with high friction, such as a relatively flat rock. At the same time, choose a gear with a transmission speed ratio that is not too large, as long as it can cope with the current situation. If it is too large, the bike may break down. After choosing the right gear, use the most used and strongest leg to pedal the bicycle while holding down the brake. When the bicycle starts to move forward, put the other foot on the pedal, and then apply force steadily. , Accelerate until you return to the predetermined lane. Another better way is to park the bike diagonally in the lane, and then turn the front of the bike over after it is started.

Technical crawl

The various rules that apply when climbing steep slopes also apply to technical climbing. The only difference is that technical climbing does not require the rider to find a suitable cycling route, as long as the rider can find a way between rocks, ravines or obtrusive tree roots. Look at the ground within 5 meters ahead and choose the best lane. However, once the cycling route is determined, don’t change it arbitrarily.

If you are interested in motorized bike and want to know more, you could browse previous articles or visit our Official Website, also choose to leave your message below.  If you are interested in electric bike, you can contact us. www.zhsydz.com

Leave your contact information

PersonalBusinessDistributor

Tags:
Prev:
Next: